Samland PA6-GF10 Lubricated Compound SL-N-GF10L (LB6000 Equivalent)

Core Properties: High Strength & Rigidity， Excellent Thermal Stability， Enhanced Flowability，Dimensional Precision

Additional information

Elongation at Break	4–6%
GF Content	10% (±1%)
HDT @1.8 MPa	≥220 °C
MB Density	~1.27 g/cm³
Notched Impact (23 °C)	≥10 kJ/m²
Tensile Modulus	~4,200 MPa
Tensile Strength (dry)	90–110 MPa
Unnotched Charpy Impact	≥50 kJ/m²

Technical Comparison

Property	LubriOne™ LB6000‑5024	SL-N-GF10L (Samland)	Customer Value
Glass Fiber Content	10% (±1%)	10%	Same stiffness baseline, easy material switch
Elongation at Break	3–5%	4–6%	Better elongation improves flexibility in stress-prone parts
HDT @1.8MPa	≥215 °C	≥220 °C	More thermal headroom in demanding conditions
Density	~1.26 g/cm³	~1.27 g/cm³	Minor gain due to consistent glass dispersion
Notched Charpy Impact (23°C)	≥9 kJ/m²	≥10 kJ/m²	Enhanced impact resistance reduces crack propagation
Tensile Modulus	~4,000 MPa	~4,200 MPa	Slightly stiffer, suitable for load-bearing frames
Tensile Strength (dry)	85–100 MPa	90–110 MPa	Higher strength supports more rugged end uses
Unnotched Charpy Impact	≥45 kJ/m²	≥50 kJ/m²	Better vibration resistance and part reliability
Melt Flow Rate (MFR)	~18 g/10min	~20 g/10min	Easier moldability in multi-gate and precision molds
Flame Retardant Grade	Not rated	UL94 HB (optional V-2)	Optional FR version meets basic appliance/electronic safety

Samland Unique Advantages:

Low-friction PA6‑GF10 compound tailored for sliding and wear-resistant applications

Improved surface finish and reduced noise generation in moving assemblies

Enhanced dimensional stability for complex or thin-walled parts

MOQ 1 ton with 3–4 week lead time — ideal for pilot runs and custom sourcing

Competitive pricing vs. imported lubricated grades, enabling long-term cost savings

Application Scenarios:

Cable guides and ducting systems — requiring low friction and consistent fit

Automotive interior moving components — such as glove box sliders, track covers

Small appliance mechanisms — e.g., fan impellers, rotating shafts

Consumer electronics housings — where the balance of rigidity and smooth actuation is key

Industrial sliding parts — with repeated motion cycles and wear considerations

Customer Pain Points Solved

Pain Point	Samland Solution
Brittle failure at low temperatures	≥10 kJ/m² notched impact strength ensures reliable toughness in cold conditions
Insufficient rigidity for structural parts	~4,200 MPa tensile modulus supports better load-bearing capacity
Part warpage in elevated temperature	HDT ≥220 °C offers thermal stability for long-term performance
Short shots or poor mold filling	MFR ~20 g/10min delivers smooth flow in complex or thin-wall tools
High price-performance ratio from imported PA6-GF10	Localized production + formula optimization = lower cost with consistent quality

Application Range

Why Choose Samland

Contact Us / Request a Sample

Phone

+ 86-13726366701

Email

daniel0253007@gmail.com

Address

No.19, Bihua Road, Baishi Village, Sanxiang Town, Zhongshan City, Guangdong Province, China.